Is your fireplace beginning to look a little dingy and worn down? Now you can give it the easiest face lift you have ever seen and all without any type of construction having to be done. When you think about cleaning the masonry surfaces of a fireplace it can be very intimidating. The thought of spending hours on your hands and knees scrubbing the masonry surfaces of a fireplace is not a very inviting thought. A dramatic face lift can be simply given to a fireplace just by using a very easy to use cleaning product… Paint N Peel Fireplace Cleaner from Chimney Rx.
Learn about Paint N Peel Fireplace Cleaner
Once you give this product a try you are going to wonder why you had waited so long to bring your fireplace back to life and turn it back into the beautiful focal point that it once was. Chimney Rx Paint N Peel Fireplace Cleaner is a water-based cleaning product that removes unsightly smoke, soot, creosote build-up and dirt stains from masonry fireplace surfaces.
No additional water is needed during the application or removal. Simply paint the product on the surface, allow it to dry, and then peel it off. This fireplace cleaner can be used to clean most all masonry surfaces both interior/exterior, textured or smooth brick, stone, marble, granite, slate, tile, concrete, mortar and limestone.
How to Use the Paint N Peel Fireplace Cleaner
It is as easy as 1-2-3. You are going to paint it on, let it dry, and peel it off. What are you going to need to complete this project? Of course you are going to need at least one ½ gallon tub of Paint N Peel Fireplace Cleaner, which is going to cover up to an 80 sq. ft. area. Depending on the size of the area that you are going to clean you may need more than just a ½ Gal. tub. Additional items that you will need are a drop cloth, some blue painters tape, and the included bristled paint brush for applying the fireplace cleaner.
To prep the surfaces, you will want to sweep off any excess debris with a broom and dust pan. Then use the blue painters tape to mask of any areas that you do not want to get the fireplace cleaner on like the fireplace doors, trim, vents, and the mantel. Lastly, you should place a drop cloth onto the floor or hearth in front of the fireplace so that any drips are easily cleaned up.
Step 1: Brush It onto the Masonry Surface
Before you begin to apply the Paint N Peel fireplace cleaner, you should give it a good heavy stir. Use the included bristled paint brush to start applying a 1/8” to a 3/16” layer of the fireplace cleaner to all of the masonry surfaces that you wish to clean. If you prefer, you can also use a heavy nap roller for applying the cleaner as well. When the fireplace cleaner is applied thicker it will allow you to peel it off with minimal tearing once it is dried.
**Tip: No worries if you accidentally drip on to something that you did not want to treat with the paint N peel, it will wash off with some warm soapy water and a rag.
Step 2: Let It Dry Completely
When you are all finished painting on the Paint N Peel Fireplace Cleaner it is time to just let it dry. The drying can take anywhere from 6-12 hours depending on how warm your home is and how much moisture is in the air of the home as well. You will know when the product is dry because it will have a grey/green color and will also become almost like an elastic rubber. When we applied the Paint N Peel we let it dry all night long so we knew it was completely dry.
Step 3: Peel It Off and See the Results
Now that the Paint N Peel fireplace cleaner is completely dried, it is time to start peeling it off. Start peeling at an edge, lifting the whole length of the edge about an inch in so that you have a good area to grab onto. This will help you peel of larger chunks at one time rather than a bunch of little pieces. There will most likely be a few small pieces that are left behind on the surface that you will have to go back and clean up.
The Paint N Peel Fireplace Cleaner when dried is pretty tough. You will need to give it a good steady pull to remove it from the porous fireplace surfaces. It can withstand a good force without ripping or shredding.
The results will be amazing! The proof will be on the back of the dried cleaner as you peel it off. You may not even have realized your fireplace surfaces were that dirty but the results will be pretty amazing when you look up close.
If you are looking for a product that is going to give you dramatic results look no further, give ChimneyRx Paint N Peel fireplace cleaner a try. You will be glad that you did. Head on over to NorthlineExpress to purchase your own tub of ChimneyRx Paint N Peel Fireplace Cleaner and give your fireplace the easiest face lift ever.